Organize a Record Collection in 7 Steps: Filing Systems, Dividers, Discogs Folders and Shelf Codes
A filing system you can find things in at 300 records and still use at 3,000

Illustration: a record, as a placeholder for the cover photo.
A collection of 200 records filed "roughly by mood" works fine until you spend ten minutes hunting for Pink Moon. These steps assume you have at least one full shelf unit and are adding records every month.
1. Measure Before You Sort
A single LP in a polythene outer sleeve takes up about 3.5–4 mm of shelf. A gatefold double takes 7–8 mm. One IKEA Kallax cube is about 33 cm wide inside and holds roughly 80–90 single LPs packed upright but not crushed.
Count your records, then divide by 70, not 85. That gives the number of cubes you need with about 20% slack. Without that slack, every new purchase in the middle of the alphabet means shifting three shelves.
2. Choose One Primary Filing System
| System | Works for | Breaks down when |
|---|---|---|
| Alphabetical by artist | Mixed rock, pop and soul collections | You want to browse by genre |
| Genre, then alphabetical | Collections over ~500 records spanning jazz, reggae, rock | Artists cross genres (Miles Davis 1959 vs 1970) |
| Label, then catalogue number | Focused jazz or reggae collections (Blue Note BLP 1500 and 4000 series, Studio One, Trojan) | Artists are spread across many labels |
| Chronological | Era-focused collections, e.g. 1966–1972 psych | You can't remember release years |
Most collectors over 500 records use genre at the top level and alphabetical inside it. Keep the genre list short. Five to eight sections is workable. Twenty sections means constant arguments with yourself.
3. Write Down Your Edge-Case Rules
Decide these once and tape the list inside a cabinet door:
- "The": ignore it. The Kinks go under K.
- Solo artists: file by surname. Bowie goes under B, Nick Drake under D.
- Stage names: file under the first word. Elvis Costello goes under E, Dr. John under D.
- Within an artist: sort by original release year, not by the date of your pressing.
- Side projects: file with the main name on the sleeve. Lee Morgan with Art Blakey as sideman goes under Morgan.
- Compilations and soundtracks: give them their own section at the end, ordered by title.
- 7-inch singles and box sets: store separately. They don't fit the same shelf depth or weight load.
4. Add Dividers Every 30–50 Records
Use 12.5-inch PVC or card dividers with a tab that stands above the sleeves. Put one at every letter, and add sub-dividers for heavy artists. If you own fifteen Fall albums, they get their own tab. A divider every 30–50 records means you never flip through more than about 25 spines to find something.
5. Set Up an Incoming Zone
Keep one cube or crate for new arrivals that haven't been cleaned, graded or catalogued yet. Nothing goes onto the main shelves until it has been through all three. This stops dirty records spreading dust into clean stock. It also stops uncatalogued records disappearing into the alphabet.
6. Catalogue on Discogs, Matched to the Exact Pressing
Add each record to your Discogs collection by matching the pressing, not just the album. Check the run-out matrix and label against the release page. Then use three built-in tools:
- Folders: create one per shelf section, such as "Jazz" or "Reggae", so the database mirrors the shelves.
- Custom fields: Media Condition and Sleeve Condition are there by default. Add a free-text field called "Location" and enter a shelf code like C4 (cube 4).
- Notes: record what you paid and where you bought it.
The location code is what makes this system pay off. Search the Discogs app on your phone, read "C4", and walk straight to the right cube.
Number your cubes left to right, top to bottom, with a small label on the frame. When you add slack and shift records along, you only update the location codes for the cubes that changed. Sort your Discogs collection by the Location field to see exactly which entries those are.
7. Export, Back Up and Insure
Discogs lets you export your collection as a CSV file. Do this every quarter and keep a copy off the platform. Your collection page also shows minimum, median and maximum value estimates.
Check those figures against your home contents policy. Many policies cap single items or "collections" at a fixed sum, so a collection with a median value of £4,000 may need a named-item extension. The CSV and photos of the shelves are the evidence an insurer will ask for after a flood or burglary.






Comments (0)
No comments yet. Be the first to share your experience.